CANOGA PERKINS CanogaOS Command Reference - Manual (Page 757)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 757 of 855
month Current month (by number).
day Current day (by date) in the month.
year Current year (no abbreviation). From 2000 to 2037.
Command Mode
Global configuration
Usage
Generally, if the system is synchronized by a valid outside timing mechanism, such as a Network Time
Protocol (NTP), or if you have a switch with hardware clock, you need not set the software clock. Use
this command if no other time sources are available. The time specified in this command is assumed to
be in the timezone specified by the configuration of the clock timezone command.
Examples
The following example manually sets the software clock to 7:29 p.m. on May 13, 2003:
Switch(config)# clock set 19:29:00 5 13 2003
Related Commands
show clock
clock set timezone
40.22 clock set timezone
To set the time zone for display purposes, use the clock set timezone command in global
configuration mode. To set the time to Coordinated Universal Time (UTC), use the no form of this
command.
Command Syntax
clock set timezone zone {add | minus} hours-offset [minutes-offset] [seconds-offset]
zone Name of the time zone to be displayed when standard time is in effect.
The length of the zone argument is limited to 32 characters.
add The positive time zone.
minus The negative time zone.
hours-offset Hours difference from UTC.
minutes-offset (Optional) Minutes difference from UTC.
seconds-offset (Optional) Seconds difference from UTC.
Command Mode
Global configuration
Default
UTC