CANOGA PERKINS CanogaOS Command Reference - Manual (Page 406)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 406 of 855
Examples
Switch#configure terminal
Switch(config)# arp vrf vpn3 1.1.1.1 0000.1111.2222
Related Commands
show ip arp vrf VRF-NAME: display arp table in vrf
clear ip arp vrf VRF-NAME A.B.C.D: Clear all arp entry in arp table of the vrf
20.6 show ip arp vrf
Use this command to show arp entry in vrf.
Command Syntax
show ip arp vrf VRF-NAME
NAME: VPN Routing/Forwarding instance name
Command Mode
Privileged EXEC mode
Usage
This example shows how to display all arp entry in the arp table of the vrf.
Swithc#show ip arp vrf ComA
Protocol Address Age (min) Hardware Addr Interface
Internet 1.1.1.1 - 0000.1111.2222
Examples
Switch#show ip arp vrf ComA
Related Commands
a rp vrf : add one static arp entry in vrf.
20.7 clear ip arp vrf
Use this command to delete a static routing entry from arp table for the vrf.
Command Syntax
clear
ip arp vrf VRF-NAME A.B.C.D
VRF-NAME: VPN Routing/Forwarding instance name
A.B.C.D: IP address of the ARP entry