CANOGA PERKINS CanogaOS Command Reference - Manual (Page 195)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 195 of 855
loopback ethernet MACADDRESS (domain DOMAIN_NAME | level LEVEL) vlan
VLAN_ID (repeat COUNT|)( timeout TIMEOUT|) (source MEPID|)
loopback ethernet mpid MEPID (domain DOMAIN_NAME | level LEVEL) vlan
VLAN_ID (repeat COUNT|)( timeout TIMEOUT|)
Command Mode
Privileged Exec mode
Default
The default repeat is1.
The default timeout is 5 seconds.
Usage
1 ）This command is used to transmit a loopback message for a MAC address to a remote MP for fault
verification.
2 ）This command is used to transmit a loopback message to a remote MEP for fault
verification.
Examples
Switch# loopback ethernet mpid 88 level 7 vlan 30
Switch# loopback ethernet 8908.0909.1267 level 7 vlan 30 repeat 5 timeout 5
Related Commands
10.12 CFM linktrace tests
Use the procedures in this section to issue CFM path trace messages and to discover the path to a remote
MEP.
Command Syntax
linktrace ethernet MAC (domain DOMAIN | level LEVEL) vlan VLANID
(ttl TTL|)( timeout TIMEOUT|)
linktrace ethernet mep MEPID (domain DOMAIN | level LEVEL) vlan VLANID
(ttl TTL|)( timeout TIMEOUT|)
Command Mode