CANOGA PERKINS CanogaOS Command Reference - Manual (Page 219)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 219 of 855
Related Commands
ip route
show ip route
12.8 show ip protocols
To display the parameters and current state of the active routing protocol process, use the show ip
protocols command in privileged EXEC mode.
Command Syntax
show ip protocols [vrf name | protocl]
vrf name VRF instance name.
protocol (Optional) The name of a routing protocol. If you specify a routing protocol,
use one of the following keywords: bgp, ospf, and rip.
Command Mode
User EXEC
Privileged EXEC
Usage
The information displayed by the show ip protocols command is useful in debugging routing
operations. Information in the Routing Information Sources field of the show ip protocols output can
help you identify a switch suspected of delivering bad routing information.
Examples
The following is sample output from the show ip protocols command:
Switch# show ip protocols
Routing Protocol is "ospf 0"
Redistributing:
Routing for Networks:
3.3.3.0/24
10.10.1.0/24
10.10.4.0/24
Distance: (default is 110)
Related Commands
show ip route