CANOGA PERKINS CanogaOS Command Reference - Manual (Page 356)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 356 of 855
18.2.1.2 Syntax Description
destination-ip-address Destionation ip address of sending icmp packet;
destination-hostname
Destionation hostname of sending icmp packet;
18.2.1.3 Command Mode
Ipsla mode
18.2.1.4 Defaults
none
18.2.1.5 Examples
In the following example, the type echo protocol ipIcmpEcho command is used to set icmp
packet and destination ip address:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)# type echo protocol ipIcmpEcho 192.168.0.1
18.2.1.6 Related Commands
show ip sla monitor
18.3 FREQUENCY
Sets the rate at which a specified IP SLA operation repeats.
To turn to default value, use no form of this command.
18.3.1.1 Command Syntax
frequency seconds
no frequency
18.3.1.2 Syntax Description
seconds Time range is from 1 to 4800.
Frequency ≥ timeout ≥ threshold
18.3.1.3 Command Mode
Ipsla mode
18.3.1.4 Defaults
Default value is 60 seconds.
18.3.1.5 Examples
In the following example, the frequency command is used to set the rate at which a specified IP
SLAs operation repeats: