How to load documents, For details, refer to – Ricoh fi-8040 Desktop Scanner User Manual
Page 88
How to Load Documents
1
Pull out the chute extension according to the length of the documents.
For details, refer to
Setting Up the ADF Paper Chute (Feeder) (page 67)
.
2
Adjust the stacker according to the length of the documents.
For details, refer to
Setting Up the Stacker (page 68)
.
3
Load documents in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
ATTENTION
●
Remove all paper clips and staples.
●
Reduce the number of documents when documents are not fed into the scanner or
overlapped documents are fed.
4
Adjust the side guides to the width of the documents.
Move the side guides so that there is no space between the side guides and the documents.
How to Load Documents
88