Ricoh fi-8040 Desktop Scanner - Manual (Page 48)

ATTENTION
To use DirectScan, the time on the scanner needs to be synced with the time on the
NTP server in advance.
Note that the scanner cannot be connected to an NTP server that requires
authentication when syncing the time.
8 In the [Enter Current Date and Time] screen, specify the current date and time, and press the
[Complete] button.
9 If necessary, specify the following items in [Scanner Settings] on the screen that appears when
you press in the lower part of the touch screen.
For details, refer to Scanner Settings (Touch Screen) (page 269) .
● Scanner name
Set a scanner name.
● IP address (IPv4)
Set an IPv4 address of the scanner.
When setting the IP address manually, set [Subnet Mask] and [Default Gateway] as well.
● DNS Server
Configure the DNS servers.
When configuring the DNS servers manually, set the IP addresses for [Primary DNS] and
[Secondary DNS].
● Send E-mail
Configure the settings for sending emails.
● Password for Editing DirectScan Settings
Set a password for adding or changing the save destinations for images, the email addresses, or
the jobs when using DirectScan.
● Proxy Server
Set this item to use a proxy server.
HINT
This setting can be configured when connecting the scanner to an FTP server, FTPS server, or
SFTP server.
● Scanner Central Admin
Set this item to use Scanner Central Admin Server or Scanner Central Admin Desktop in order
to manage scanners.
● Network Encryption
Specify whether to encrypt network communications.
Scanner Setup
48