Ricoh fi-8040 Desktop Scanner - Manual (Page 352)

Settings Related to the Connection Between the Scanner and Computer
Specifying the USB Operation [USB]
Change the USB setting if an error occurred on a computer during communication.
If this setting is changed, the scanner is restarted.
1 Start up the Software Operation Panel.
For details, refer to
Starting Up the Software Operation Panel (page 303) .
2 From the list on the left, select [Device Setting 2] → [USB].
3 Specify how the USB function operates.
Automatic
Operates in accordance with the connection environment. This is the factory default setting.
USB 2.0
Operates with USB 2.0.
Scanner Settings (Software Operation Panel)
352