Ricoh fi-8040 Desktop Scanner User Manual
Page 49
ATTENTION
An administrator password is required to display the [Scanner Settings] screen. The default
password is "password".
Change the administrator password to prevent the settings from being changed by other
users.
Also, change the administrator password regularly.
The administrator password can be changed in the screen that appears in the following
procedure:
→
[Scanner Settings]
→
[Admin Password]
HINT
When the scanner is connected to a network, the network settings can be changed in fi Series
Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) (page 359)
10
If you use a CA certificate or encryption key for communication with the destination for
DirectScan that is set in step
to send images, set it in fi Series Network Settings.
For details about fi Series Network Settings, refer to
Network Settings (fi Series Network Settings)
.
●
CA Certificates
Set them when the destination is an FTPS server or SMTP server.
●
Encryption Key
Set it when the destination is an SFTP server.
11
Set a destination for images that is used for DirectScan.
●
When saving images to a folder on the network
a
In the main screen, press the [Save to a folder] button.
b
Press the [Yes] button on the screen for confirming whether to configure save
destinations.
c
In the screen to confirm whether or not to configure the DirectScan settings in fi Series
Network Settings (browser), press the [No] button.
HINT
To configure the settings in fi Series Network Settings, press the [Yes] button, then
operate according to the description displayed on the screen.
For details about fi Series Network Settings, refer to
.
d
In the [Add Save Destination] screen, set a save destination and press the [Set] button.
Scanner Setup
49