Ricoh fi-8040 Desktop Scanner - Manual (Page 367)

Network
Scanner Name
Set a scanner name.
Click [Scanner Name] under [Network] to display the window.
Scanner Name
Enter a scanner name within 64 characters.
The following characters can be used for a scanner name:
● Alphanumerical characters
● Space
The space before or after the character string is ignored.
● Symbols
-_
The factory default setting is [fi-8040-].
[Apply to the scanner] button
Applies the configured settings.
HINT
● The scanner serial number can be checked on the product label.
For the product label, refer to
Checking the Product Label (page 250) .
● When [Dynamic DNS] is enabled, enter a scanner name within 63 characters.
For details about Dynamic DNS, refer to
Wired LAN (page 369) .
It is also recommended that you do not use the following characters for the scanner name as
they are replaced with "-" when the name is registered in the DNS servers.
- Underscore "_"
- Space
● The scanner name can be checked in the screen that appears via the following procedure:
→ on the touch screen
Network Settings (fi Series Network Settings)
367