Ricoh fi-8040 Desktop Scanner - Manual (Page 198)

The Touch Screen Switches Off
Check the following points
● Has the scanner been left out of operation for a long time after being powered on? (page
198)
If the problem still persists, check each item in Before You Contact the Scanner Service
Provider (page 248) first, then contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Has the scanner been left out of operation for a long time after being powered on?
Solution
The scanner has entered power saving mode or has been automatically turned off.
● If the scanner has entered power saving mode
The touch screen switches off.
Resume from power saving mode by one of the following methods:
- Load a document in the ADF paper chute (feeder).
- Press a button on the touch screen.
- Scan a document with the image scanning application.
For details, refer to Entering and Resuming from Power Saving Mode (page 63) .
● If the scanner has been automatically turned off
The touch screen switches off.
Turn on the scanner.
For details, refer to
How to Turn the Power ON (page 61) .
Troubleshooting
198