Memory error – Ricoh fi-8040 Desktop Scanner User Manual
Page 180
Error Code
Error Details
Refer to
—
Scanning has been paused by the
user
Scanning Has Been Paused by the
User (page 192)
U7:20
Outside designated scan area error
Outside Designated Scan Area Error
(page 192)
—
Invalid Command
Memory Error
If a memory error occurs, the [Error] screen on the touch screen displays one of the following error
codes and the corresponding details and solution.
Error Code
Error Details and the Solution
C0:E5
Memory error (Front)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E5
C0:E6
Memory error (Back)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E6
C0:E9
LSI error (Front)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E9
C0:EA
LSI error (Back)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:EA
C1:E0
LSI error (Initialization failure)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
C1:E0
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in
Scanner Service Provider (page 248)
and then contact the distributor/dealer where you purchased
this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
Troubleshooting
180