Setting items – Ricoh fi-8040 Desktop Scanner User Manual
Page 362
Setting Items
Network settings can be changed in the fi Series Network Settings window.
This section shows a list of setting items that you can configure.
ATTENTION
To change the network settings, the administrator password is required. The default password is
"password".
Change the administrator password to prevent the settings from being changed by other users.
Also, change the administrator password regularly.
The administrator password can be changed in [Admin Password] under [Maintenance].
●
Scanner Information
Setting Item
Description
Scanner Information (page 365)
Displays the scanner information such as standard
information, scanner name, and network information.
●
How to use
Setting Item
Description
Set the usage method of the scanner.
●
Network
Setting Item
Description
Set a scanner name.
Specify whether or not to issue a scanner code.
If the [PaperStream NX Manager] setting is enabled, a
scanner code can be used when scanning with a user
application on a computer or mobile device.
Set an IPv4 address or IPv6 address for the scanner.
ATTENTION
The following settings do not support IPv6:
●
DNS Server
●
Proxy Server
●
PaperStream NX Manager
●
Scanner Central Admin Server
●
Scanner Central Admin Desktop
Network Settings (fi Series Network Settings)
362