Ricoh fi-8040 Desktop Scanner - Manual (Page 245)

●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
Daily Care (page 150) .
●
Is the Roller Set S worn out?
Solution
Check the counters for the consumables using one of the following methods.
● The [Consumable counters] screen on the touch screen
The screen can be displayed in the following procedure:
→ [Cleaning & Maintenance] → [Consumable counters]
● Software Operation Panel
For details, refer to
Clearing the Sheet Counters (page 325) .
If necessary, replace the Roller Set S.
For details, refer to
Replacing the Roller Set S (page 168) .
●
Is there any foreign matter in the ADF?
Solution
Clean the ADF.
Remove any foreign matter from the ADF.
For details, refer to
Daily Care (page 150) .
●
Did you place a thick document inside the Carrier Sheet?
Solution
Some papers may be too thick to place inside the Carrier Sheet.
Use documents that meet the requirements.
For details, refer to
Conditions for Using the Carrier Sheet (page 105) .
Troubleshooting
245