Ricoh fi-8040 Desktop Scanner - Manual (Page 236)

Situation in Which the Document Is not Fed into the ADF Occurs
Frequently
Check the following points
● Do the documents meet the paper requirements? (page 236)
● Did you fan the documents before loading them? (page 236)
● Is the Roller Set S installed correctly? (page 236)
● Is the Roller Set S clean? (page 236)
● Is the Roller Set S worn out? (page 236)
● Did you scan a thick document such as a plastic card? (page 237)
If the problem still persists, check each item in Before You Contact the Scanner Service
Provider (page 248) first, then contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to
Documents for Scanning (page 91) .
●
Did you fan the documents before loading them?
Solution
Fan the documents.
For details, refer to
Preparation (page 86) .
●
Is the Roller Set S installed correctly?
Solution
Install the Roller Set S correctly.
For details, refer to
Replacing the Roller Set S (page 168) .
●
Is the Roller Set S clean?
Solution
Clean the Roller Set S.
For details, refer to
Daily Care (page 150) .
●
Is the Roller Set S worn out?
Solution
Check the counters for the consumables using one of the following methods.
Troubleshooting
236