Ricoh fi-8040 Desktop Scanner - Manual (Page 285)

ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
Port Number
The factory default setting is "20447".
[Check connection] button
Check if the scanner can be connected to PaperStream NX Manager.
Auto Login/Logout
Specify an auto login method or set the auto logout time for PaperStream NX
Manager.
Auto Logout minutes
Specify a time (minutes) to automatically log out from PaperStream NX Manager
if the scanner is left on for a certain period of time without being used.
● Disabled (Never)
This is the factory default setting.
● 1
● 2
● 3
Auto Login
Specify an auto login method for PaperStream NX Manager.
● Disabled
This is the factory default setting.
● Username/Password
● Job Group Code
For details, refer to the PaperStream NX Manager User's Guide.
Application (Internet)
Set this item when scanning with a user application on a computer or mobile device in
an environment in which PaperStream NX Manager and a scanner are connected via
the Internet.
Enable
The factory default setting is set to off.
Scanner Settings (Touch Screen)
285