Ricoh fi-8040 Desktop Scanner User Manual
Page 156
Cleaning the Inside of the Scanner (ADF) with Cleaning Paper
The inside of the ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.
As the scanner continues to feed the documents, paper dust will accumulate inside the ADF and it may
cause problems related to scanning or affect the scanned results. Cleaning should be performed
approximately every 3,000 sheets scanned. Note that this guideline varies depending on the types of
documents you scan. For instance, it may be necessary to clean the scanner more frequently when you
scan documents on which the toner is not sufficiently fused.
ATTENTION
●
Do not use water or mild detergent to clean the ADF.
●
It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use only a small
amount.
1
Turn on the scanner.
For details, refer to
How to Turn the Power ON (page 61)
2
On the touch screen, press
→
[Cleaning & Maintenance]
→
[Cleaning]
→
[Cleaning Paper].
The [Cleaning Paper] screen is displayed.
ATTENTION
Do not start scanning with an image scanning application during cleaning.
3
Spray the Cleaning Paper with Cleaner F1.
4
Pull out the chute extensions according to the length of the Cleaning Paper.
For details, refer to
Setting Up the ADF Paper Chute (Feeder) (page 67)
.
5
Adjust the stacker according to the length of the Cleaning Paper.
For details, refer to
Setting Up the Stacker (page 68)
.
Daily Care
156