Ricoh fi-8040 Desktop Scanner - Manual (Page 217)

●
Are the settings on the scanner that are related to the server specified correctly?
Solution
Check the server setting items in the following procedure:
1 On the touch screen, press → [Scanner Settings] → [Network] → [Server].
2 Press the server to be connected to, and check the setting items.
● Whether [Enable] is on.
● Whether [Host Name/IP address] and [Port Number] are correct.
● Whether the setting for [Authentication] for a proxy sever is correct.
HINT
The server setting items can also be checked in fi Series Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) (page 359) .
●
Are the settings on the server specified correctly?
Solution
Refer to the manual for your server and check the settings.
●
Are the [Network Encryption] settings the same on the scanner and the server?
Solution
Check that the [Network Encryption] setting on the scanner is the same as the settings on
PaperStream NX Manager, Scanner Central Admin Server, and Scanner Central Admin Desktop
in the following procedure:
1 On the touch screen, press → [Scanner Information] → [Network].
2 Check [Network Encryption] in the [Network] screen.
HINT
The network encryption setting can also be checked in fi Series Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) (page 359) .
Troubleshooting
217