Ricoh fi-8040 Desktop Scanner - Manual (Page 420)

Code Character Set Check Digit Field Width
- For barcodes that
begin with
(EAN128)
The first FNC1 will not
be output. Barcode
values will be output
with function codes
other than FNC1
replaced with "_"
(underscore).
- For barcodes that do
not begin with
to are
not output.
● Start/Stop characters
(CODE-A, CODE-B,
CODE-C)
● Code set characters
(CODE-A, CODE-B,
CODE-C)
Codabar
(NW-7) ● Start/Stop characters
(ABCD)
● Numeric character (0-9)
● Symbols (-$/.+:)
The barcode value
including the check digit
will be output without
check digit verification. 1 to 32 (excludes start and
stop codes) (*1)
ITF Numeric character (0-9) The barcode value
including the check digit
will be output without
check digit verification. 2 to 32 (always an even
number of digits) (*1)
*1:When scanning barcodes containing more than 32 digits, make sure that the barcode has been
accurately recognized before starting operations.
●
Detection Conditions for One-dimensional Barcodes
Item Condition
Barcode height 10 to 30 mm/0.39 to 1.18 in.
Barcode width 300 mm/11.81 in. or less
Barcode margin 5 mm/0.20 in. or more on each side of barcode
(The left and right edges of ITF are either 5 mm/0.20 in. or more, or six times
the width of the thin element or more, whichever is larger)
Appendix
420