Ricoh fi-8040 Desktop Scanner - Manual (Page 271)

Setting Item Description
Dropout Color (page
297) You can exclude a color from being scanned by
selecting either red, green, or blue (three
primary colors).
Offset (page 297) Specify a starting position for scanning.
Magnification (page
298) Specify the magnification level for the feed
direction.
Cleaning &
Maintenance (page
299) Cleaning cycle (page
299) Specify the cleaning cycle for the scanner inside.
Replacement of the
Pick Roller (page 299) Specify the replacement cycle for the pick roller.
Replacement of the
Brake Roller (page
299) Specify the replacement cycle for the brake
roller
Maintenance cycle
(page 300) Specify the maintenance and inspection cycle
for the scanner that is performed by a service
engineer.
Function Selection Display (page 301) When using the scanner connected to a
computer, specify whether to display buttons
with no name in the [Function Selection] screen.
USB (page 301) Change the USB setting if an error occurred on
a computer during communication.
Admin Password (page 301) Change the administrator password.
Restore Factory Defaults (page 302) Restore the scanner settings to the factory
default.
ATTENTION
You cannot back up or restore the scanner settings on the touch screen.
Scanner Settings (Touch Screen)
271