Ricoh fi-8040 Desktop Scanner - Manual (Page 168)

Replacing the Roller Set S
The Roller Set S consists of the brake roller and the pick roller.
Replace the Roller Set S in following procedure.
1 Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
How to Turn the Power OFF (page 62) .
2 Remove all documents from the ADF paper chute (feeder).
3 Open the ADF.
For details, refer to
How to Open the ADF (page 65) .
CAUTION
When the ADF is open, it might close accidentally. Be careful not to get
your fingers caught.
4 Replace the brake roller.
a Open the brake roller cover.
Hold both ends of the cover, and open it in the direction of the arrow.
b Remove the brake roller.
Replacing the Consumables
168