Ricoh fi-8040 Desktop Scanner - Manual (Page 284)

● When connecting to an FTP server, FTPS server, or SFTP server with DirectScan
Enable
Set this item to use a proxy server.
The factory default setting is set to off.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
● Port Number
The factory default setting is "8080".
Authentication
Specify whether or not authentication is necessary for a proxy server.
The factory default setting is set to off.
When [Authentication] is set to on, specify the following items:
● Username
Enter the user name used to connect to the proxy server.
The space before or after the character string is ignored.
● Password
Enter the password for the user name used to connect to the proxy server.
Spaces before and after the character string are maintained.
PaperStream NX Manager
Set this item when the way for use of the scanner is [Use by connecting to PaperStream
NX Manager].
PaperStream NX Manager
Configure the settings for PaperStream NX Manager to be connected to the scanner.
Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
Scanner Settings (Touch Screen)
284