Ricoh fi-8040 Desktop Scanner - Manual (Page 238)

Paper Jams/Pick Errors Occur Frequently
Check the following points
● Do the documents meet the paper requirements? (page 238)
● Is there any foreign matter in the ADF? (page 238)
● Is there a document remaining in the ADF? (page 238)
● Is the Roller Set S installed correctly? (page 238)
● Is the Roller Set S clean? (page 238)
● Is the Roller Set S worn out? (page 239)
If the problem still persists, check each item in Before You Contact the Scanner Service
Provider (page 248) first, then contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to
Documents for Scanning (page 91) .
●
Is there any foreign matter in the ADF?
Solution
Clean the ADF.
Remove any foreign matter from the ADF.
For details, refer to
Daily Care (page 150) .
●
Is there a document remaining in the ADF?
Solution
Remove the document from the ADF.
For details, refer to
When a Paper Jam Occurs (page 175) .
●
Is the Roller Set S installed correctly?
Solution
Install the Roller Set S correctly.
For details, refer to
Replacing the Roller Set S (page 168) .
●
Is the Roller Set S clean?
Solution
Clean the Roller Set S.
Troubleshooting
238