Ricoh fi-8040 Desktop Scanner - Manual (Page 379)

- Password
Enter the password for the user name used for connecting to the save destination.
Spaces before and after the character string are maintained.
HINT
The only connection mode for connecting to the FTPS server is "Passive Mode".
● SFTP
When [SFTP] is selected, specify the following items:
- Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
- Port Number
The factory default setting is "22".
- Save Destination Path
The spaces before and after the character string and "/" prefix are ignored.
" " will be replaced with "/". When the first character is " ", the character will be replaced
with "/" and the leading "/" will be deleted.
HINT
If the save destination path contains characters that cannot be displayed on the touch
screen of the scanner (such as environment-dependent characters), the path may not
display correctly on the screen.
- Authentication Method
Set the authentication method.
When [Public Key Algorithm] is [Disabled], specify [Password authentication].
When [Public Key Algorithm] is other than [Disabled], select one of the following:
● Password authentication
This is the factory default setting.
● Public Key Authentication
The public key algorithm used when the encryption key is generated is displayed in
[Public Key Algorithm].
Network Settings (fi Series Network Settings)
379