Ricoh fi-8040 Desktop Scanner - Manual (Page 266)

Set the area to detect barcodes on.
When a rotation direction of an image is specified for [Rotation], the detection area is
applied to the image after it has been rotated.
A barcode will be detected when the entire barcode appears within the defined
detection area.
- All area
Barcodes are detected across the entire area of a document.
- Top
Barcodes are detected across the top section of a document when the document is
divided into three sections.
The detection area across the top section extends 1 in. below the dividing line
between the top and middle sections.
This is the factory default setting.
- Middle
Barcodes are detected across the middle section of a document when the document is
divided into three sections.
The detection area across the middle section extends 1 in. below the dividing line
between the middle and bottom sections.
- Bottom
Barcodes are detected across the bottom section of a document when the document is
divided into three sections.
HINT
If barcodes fall across the dividing lines that divide a document into three sections,
select [All area].
● Barcode Detection Side
Set the document side to detect barcodes on.
- Front Side
This is the factory default setting.
- Back Side
DirectScan Settings (Destination/Job/Scan Settings) (Touch Screen)
266