Ricoh fi-8040 Desktop Scanner - Manual (Page 275)

Scanner Name
Scanner name
Set a scanner name.
Enter a scanner name within 64 characters.
The following characters can be used for a scanner name:
● Alphanumerical characters
● Space
The space before or after the character string is ignored.
● Symbols
-_
The factory default setting is [fi-8040-].
HINT
● The scanner serial number can be checked on the product label.
For the product label, refer to
Checking the Product Label (page 250) .
● When [Dynamic DNS] is enabled, enter a scanner name within 63 characters.
For details about Dynamic DNS, refer to
Network (page 277) .
It is also recommended that you do not use the following characters for the scanner name as
they are replaced with "-" when the name is registered in the DNS servers.
- Underscore "_"
- Space
● The scanner name can be checked in the screen that appears via the following procedure:
→ on the touch screen
Scanner Code
Set this item when the way for use of the scanner is [Use by connecting to PaperStream NX
Manager].
Scanner Code
Specify whether or not to issue a scanner code.
If the [PaperStream NX Manager] setting is enabled, a scanner code can be used when
scanning with a user application on a computer or mobile device.
Enable
The factory default setting is set to off.
When [Enable] is set to on, make sure you enter characters for [Code].
Scanner Settings (Touch Screen)
275