Ricoh fi-8040 Desktop Scanner User Manual
Page 84
Processing a Job (When Using the Scanner Connected to PaperStream NX
Manager)
This section explains about the basic flow of starting a scan by processing a job set in PaperStream NX
Manager.
To process a job with the scanner, you need to configure the preferences settings for PaperStream NX
Manager.
For details, refer to the PaperStream NX Manager User's Guide.
1
Turn on the scanner.
For details, refer to
How to Turn the Power ON (page 61)
2
Confirm that the following main screen is displayed on the touch screen.
The screen example is for the login method that uses a user name.
HINT
●
If the above screen is not displayed, refer to
How to Change the Way the Scanner Is Used
to change the main screen.
●
When authenticating a user using a specific scanner, the screen showing the job list appears
in place of the login screen.
For details about authentication methods, refer to the PaperStream NX Manager User's
Guide.
3
Enter authentication information and press the [Login] button.
Log in to PaperStream NX Manager with one of the following methods.
●
Logging in with a username/password
Enter a specific user name for logging in.
How to Perform a Basic Scan
84