beautypg.com

Ricoh fi-8040 Desktop Scanner User Manual

Page 212

background image

1

On the touch screen, press

[Scanner Settings]

[Network]

[Wired LAN]

[DNS Server].

2

On the [DNS Server] screen, check the setting items for the following.

Whether the primary DNS and secondary DNS settings are correct

HINT

The DNS server settings for the scanner can be checked in fi Series Network Settings.
For details, refer to

Network Settings (fi Series Network Settings) (page 359)

.

Does the DNS server function normally?

Solution

Check whether the DNS server functions normally by following the procedure below.

1

On the touch screen, press

[Scanner Settings]

[Network]

[Check

connection (Ping)].

2

In the [Check connection (Ping)] screen, enter the IP address of the DNS server, and
press the [Run] button.
The result is displayed.
Refer to the connection test result from

How to Check the Network Connection for the

Scanner (page 412)

and take measures accordingly.

If the DNS server does not function normally, contact the DNS server administrator.

HINT

The IP address for the DNS server can also be checked in fi Series Network Settings.
For details, refer to

Network Settings (fi Series Network Settings) (page 359)

.

Are the scanner and server connected to the network?

Solution

Refer to

Cannot Connect the Scanner and a Computer via a Wired LAN (page 202)

and take

measures accordingly.

Is the IP address of the scanner correct?

Solution

Check the IP address of the scanner in the following procedure:

Troubleshooting

212