Ricoh fi-8040 Desktop Scanner - Manual (Page 36)

Connection Method Icon Connection Status
Wired LAN The scanner is connected via a wired
LAN.
The scanner is not connected via a
wired LAN.
None The wired LAN is disabled.
USB The scanner is connected via a USB
cable.
None The scanner is not connected via a
USB cable.
You can check the settings and messages for the scanner.
When there is a message, is displayed.
Press the icon to display the message.
Tab Overview
Information You can check the following settings.
● Scanner name
● IP address
● USB
● Number of sheets scanned
● Operation mode for the Intelligent multifeed detection
function, and the number of overlapping patterns that are
memorized
● Error information which occurred most recently
Message You can check messages on replacing consumables, cleaning
instructions, glass cleaning, maintenance, and IP address
conflicts.
Help You can check how to load documents and how to clean the
scanner.
You can check or change the settings for the scanner.
Scanner Overview
36