Power management – Ricoh fi-8040 Desktop Scanner User Manual
Page 273
Power Management
●
●
●
Startup Mode
Specify a startup mode for the scanner.
●
Fast
The scanner enters power saving mode by pressing the [Power] button for 2 seconds or
more.
The scanner can perform a scan immediately when it resumes from power saving mode.
●
Normal
The scanner is turned off by pressing the [Power] button for 2 seconds or more.
This is the factory default setting.
ATTENTION
If you select [Fast], the scanner is not turned off regardless of the [Auto Shutdown hours] in
[Power Save Mode]. The scanner enters power saving mode when the [Power] button of the
scanner is pressed for two seconds or longer, regardless of the [Power Button] settings.
Power Save Mode
You can specify the waiting time for the scanner to automatically enter power saving mode or
to be automatically turned off if it is left on for a certain period of time without being used.
Power Save minutes
Specify the waiting time before the scanner enters power saving mode.
The factory default setting is "15".
Auto Shutdown hours
Specify the waiting time before the scanner turns off automatically.
●
Disabled (Never)
●
1
●
2
●
4
This is the factory default setting.
●
8
ATTENTION
●
If [Fast] is selected for [Startup Mode], this setting will be ignored.
Scanner Settings (Touch Screen)
273