Module error, Network setting error – Ricoh fi-8040 Desktop Scanner User Manual

Page 185

Error Code

Error Details and the Solution

If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code L6:1B

Take the following measures.

●

Refer to

Cleaning the Inside of the Scanner (ADF) with a Cloth (page 158)

to clean the ultrasonic

sensors.

●

Turn the scanner off then back on.

If the problem still persists, write down the error code, check each item in

Before You Contact the

Scanner Service Provider (page 248)

and then contact the distributor/dealer where you purchased

this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.

Module Error

If a module error occurs, the [Error] screen on the touch screen displays the following error code
and the corresponding details and solution.

Error Code

Error Details and the Solution

M1:D5

Wired LAN error
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code M1:D5

Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in

Before You Contact the

Scanner Service Provider (page 248)

and then contact the distributor/dealer where you purchased

Network Setting Error

If a network settings error occurs, the [Error] screen on the touch screen displays one of the
following error codes and the corresponding details and solution.

Error Code

Error Details and the Solution

M4:A2

The scanner is not connected to the network. Check the network
settings.

M4:A3

Cannot connect to the proxy server. Check the network settings.

M4:A4

Cannot connect to PaperStream NX Manager. Check the network
settings.

Troubleshooting

185