Ricoh fi-8040 Desktop Scanner - Manual (Page 130)

This setting item is displayed when the setting for stopping the scan to check images is set to
on in the scanner driver.
With the above procedure complete, the scanner operates as follows depending on the operation
mode that is set in the [Intelligent Multifeed Detection] screen.
● For [Manually Bypass] / [Manual mode]
The scanner scans the next sheet without detecting overlapped documents, and from the second
sheet onwards, detects overlapped documents based on the setting configured in the scanner driver,
on the touch screen, or on the Software Operation Panel.
● For [Automatically Bypass (combination of length and position)] / [Auto mode 1]
The scanner memorizes the length and location of the paper attachment that was detected as
overlapped documents, and continues scanning. After that, documents with the same overlap
pattern are not detected as overlapped documents.
● For [Automatically Bypass (length)] / [Auto mode 2]
The scanner memorizes the length of the longest paper attachment that was detected as overlapped
documents, and continues scanning. After that, documents with the same overlap pattern or with a
shorter overlap pattern are not detected as overlapped documents.
Various Ways to Scan
130