Settings related to scanning, For details, refer to, Offset setting – Ricoh fi-8040 Desktop Scanner User Manual
Page 329: Vertical magnification adjustment
Settings Related to Scanning
Adjusting the Starting Position for Scanning [Offset Setting/Vertical
magnification Adjustment]
When the output position of the scanned image is not correct or the image appears shortened/
elongated (vertically), adjust the offset and the vertical magnification.
ATTENTION
Normally, you should not have to modify anything as the factory default settings already use
adjusted values.
1
Start up the Software Operation Panel.
For details, refer to
Starting Up the Software Operation Panel (page 303)
.
2
From the list, select [Device Setting] and click the [Offset] button.
3
Adjust the level of offset/vertical magnification as needed.
Scanner Settings (Software Operation Panel)
329