Eeprom error, Image memory read-write error, Carrier error – Ricoh fi-8040 Desktop Scanner User Manual

Page 182

EEPROM Error

If an EEPROM error occurs, the [Error] screen on the touch screen displays the following error code
and the corresponding details and solution.

Error Code

Error Details and the Solution

E7:D2

EEPROM error
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code E7:D2

Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in

Before You Contact the

Scanner Service Provider (page 248)

and then contact the distributor/dealer where you purchased

this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.

Image Memory Read-Write Error

If an error occurs when data is read from the image memory or written on the image memory, the
[Error] screen on the touch screen displays one of the following error codes and the corresponding
details and solution.

Error Code

Error Details and the Solution

E9:F5

Image memory read-write error (Front)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code E9:F5

E9:F6

Image memory read-write error (Back)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code E9:F6

Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in

Before You Contact the

Scanner Service Provider (page 248)

and then contact the distributor/dealer where you purchased

Carrier Error

If a carrier error occurs, the [Error] screen on the touch screen displays the following error code
and the corresponding details and solution.

Troubleshooting

182