Ricoh fi-8040 Desktop Scanner - Manual (Page 402)

Maintenance
Admin Password
Change the administrator password.
Change the administrator password to prevent the settings from being changed by other users.
Specify whether or not to set the administrator password depending on the operation.
If you do not want to set an administrator password, leave the field blank after deleting the
factory default setting values.
Change the administrator password regularly.
The factory default of the password is "password".
Click [Admin Password] under [Maintenance] to display the window.
New Password
Enter a new password within 16 characters to change the current password.
The following characters can be used for a new password:
● Alphanumerical characters
● Space
● Symbols
-/:;() &@".,?!'#%^*+=_|~<>$[]`{}
● Diacritics
Spaces before and after the character string are maintained.
Confirm New Password
Re-enter the password entered for [New Password] for confirmation to change the current
password.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings)
402