Ricoh fi-8040 Desktop Scanner - Manual (Page 150)

Daily Care
This section describes how to clean the scanner.
CAUTION
● Do not use aerosol spray or spray that contains alcohol. Paper dust blown up by
strong air from the spray may enter inside the scanner which may cause the
scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a fire.
● The inside of the ADF becomes very hot when the scanner is being used.
Before you start cleaning the inside of the ADF, make sure to turn off the
power, unplug the power cable and wait for at least 15 minutes for the inside
of the ADF to cool down.
Cleaning Materials
Name Part No. Notes
Cleaner F1 PA03950-0352 100 ml
Liquid cleaner to use for removing dirt and
stains
Cleaning Paper CA99501-0012 10 sheets
Used to clean the inside of the scanner with
ease.
Spray it with Cleaner F1 and scan it with the
scanner in the same way as a document.
Cleaning Wipe PA03950-0419 24 packets
Pre-moistened with Cleaner F1. It can be used
instead of moistening a cloth with Cleaner F1.
Cotton swab Commercially
available Used to clean a tiny part such as the ultrasonic
sensor.
Dry cloth Used to wipe off dirt and stains. Moisten it with
Cleaner F1 for cleaning.
150