Ricoh fi-8040 Desktop Scanner User Manual
Page 54
HINT
When configuring a host name, the DNS servers need to be set on the scanner.
●
Scanner Central Admin
Set this item to use Scanner Central Admin Server or Scanner Central Admin Desktop in order
to manage scanners.
●
Network Encryption
Specify whether to encrypt network communications.
ATTENTION
An administrator password is required to display the [Scanner Settings] screen. The default
password is "password".
Change the administrator password to prevent the settings from being changed by other
users.
Also, change the administrator password regularly.
The administrator password can be changed in the screen that appears in the following
procedure:
→
[Scanner Settings]
→
[Admin Password]
HINT
When the scanner is connected to a network, the network settings can be changed in fi Series
Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) (page 359)
9
Check the network connection status for the scanner.
For details, refer to
How to Check the Network Connection for the Scanner (page 412)
.
10
Install PaperStream NX Manager on the computer.
For details about the software and how to install the software, refer to
HINT
When using PaperStream NX Manager, you do not need to install software from the bundled
Setup DVD-ROM. Install a necessary software by referring to the PaperStream NX Manager
User's Guide.
11
Use PaperStream NX Manager to create a job to be processed on the scanner.
For details about how to create a job, refer to the PaperStream NX Manager User's Guide.
12
Check whether the scanner is ready to start scanning.
For details, refer to
How to Perform a Basic Scan (page 69)
Scanner Setup
54