Ricoh fi-8040 Desktop Scanner - Manual (Page 42)

Using the Scanner Connected to a Computer via a Wired LAN
This section explains the setup procedure for using the scanner connected to a computer via a wired
LAN.
About the procedure from unpackaging the scanner to turning the power on, refer to Getting Started.
1 Turn on the scanner.
For details, refer to
How to Turn the Power ON (page 61) .
2 In the [Display language] screen, select a language, and press the [Next] button.
3 When the [Limited Warranty Guide] screen appears, confirm the displayed information and
press the [Next] button.
4 In the [Startup Mode] screen, select a startup mode and press the [Next] button.
5 In the [Select Usage] screen, select [Use the scanner connected to a computer] and press the
[Complete] button.
6 Connect the scanner to the computer as follows.
a Connect the computer to a network device via a wired LAN or Wi-Fi ( ).
The procedure below shows an example of connecting the computer to a network device
via a wired LAN.
For details about how to connect the computer to the network, refer to your computer
manual.
b Connect the scanner to the network device via a wired LAN ( ).
Scanner Setup
42