Ricoh fi-8040 Desktop Scanner - Manual (Page 55)

Installing the Software
This section describes the software required when using the scanner connected to a computer, the
system requirements, and the installation method.
The software can be installed from the bundled Setup DVD-ROM or downloaded from the
download site and then installed.
HINT
PaperStream NX Manager, Scanner Central Admin, and Scanner Central Admin Desktop can be
downloaded from the download site and then installed.
● When using the scanner connected to PaperStream NX Manager, refer to the PaperStream NX
Manager User's Guide.
● When using Scanner Central Admin, refer to the Scanner Central Admin User's Guide.
● When using Scanner Central Admin Desktop, refer to the Scanner Central Admin Desktop
Help.
Overview of the Bundled Software
This section describes the software that is required for the computer you want to connect the
scanner to.
This product is bundled with the following software.
● PaperStream IP driver
The PaperStream IP driver is a scanner driver that conforms to the TWAIN/ISIS standard. It
supports scanners connected to a network.
There are three types of PaperStream IP drivers.
- PaperStream IP (TWAIN)
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant
32-bit applications.
- PaperStream IP (TWAIN x64)
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant
64-bit applications.
Regardless of your operating system, if the image scanning application that you are using is a
32-bit application, use PaperStream IP (TWAIN).
- PaperStream IP (ISIS) fi-8000 Series
Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant
applications.
For details, refer to the PaperStream IP driver Help.
● Network Setup Tool for fi Series
The following applications are included.
These applications are used to connect the scanner to a computer and to use it on a network.
- Scanner Selection Tool
Scanner Setup
55