Allied Telesis AT-FS970M Series - Manual (Page 999)

AT-FS970M Switch Command Line User’s Guide
999
Deleting VLANs
To delete private VLANs from the switch, use the NO VLAN command in
the VLAN Configuration mode. The host and uplink ports of deleted private
VLANs are automatically returned by the switch to the Default_VLAN.
Here is the format of the command:
no vlan vid
The VID parameter is the VID of the private VLAN you want to delete. The
command lets you delete only one VLAN at a time. You cannot delete the
Default_VLAN.
This example deletes a VLAN that has the VID 23:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# no vlan 23