beautypg.com

Show lacp sys-id, Figure 142. show lacp sys-id command – Allied Telesis AT-FS970M Series User Manual

Page 748

background image

Chapter 50: LACP Commands

748

SHOW LACP SYS-ID

Syntax

show lacp sys-id

Parameters

None

Mode

Privileged Exec mode

Description

Use this command to display the LACP priority value and MAC address of
the switch. Figure 142 provides an example of the display.

Figure 142. SHOW LACP SYS-ID Command

Note

The LACP priority value is set as an integer with “LACP SYSTEM-
PRIORITY” on page 740 and
displayed in hexadecimal format by
this command.

Example

This example displays the LACP priority value and MAC address:

awplus# show lacp sys-id

System Priority: 0x0080 (32768)
Mac Address: EC-CD-6D-1E-52-28