Allied Telesis AT-FS970M Series - Manual (Page 1088)

Chapter 70: 802.1x Port-based Network Access Control Commands
1088
DOT1X EAP
Syntax
dot1x eap discard | forward | forward-untagged-vlan |
forward-vlan
Parameters
discard
Discards all ingress EAP packets on all ports.
forward
Forwards ingress EAP packets across all VLANs and ports.
forward-untagged-vlan
Forwards ingress EAP packets only to untagged ports in the same
VLAN as the ingress port.
forward-vlan
Forwards ingress EAP packets to tagged and untagged ports in
the same VLAN as the ingress port.
Mode
Global Configuration mode
Description
Use this command to control the action of the switch to EAP packets when
802.1x authentication is disabled on the switch.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
Examples
This example configures the switch to forward all EAP packets when
802.1x authentication is disabled:
awplus> enable
awplus# configure terminal
awplus(config)# dot1x eap forward