Allied Telesis AT-FS970M Series - Manual (Page 471)

471
Chapter 28
DHCP Relay Commands
The DHCP relay commands are summarized in Table 45.
Table 45. DHCP Relay Commands
Command Mode Description
“IP DHCP-RELAY” on page 473 VLAN
Configuration Adds the DHCP relay agent to VLANs.
“IP DHCP-RELAY AGENT-OPTION”
on page 474 Global
Configuration Configures the DHCP relay agent to
insert its option 82 information into the
client-request packets it relays to the
DHCP servers.
“IP DHCP-RELAY AGENT-OPTION
CHECKING” on page 475 Global
Configuration Configures the DHCP relay agent to
discard DHCP requests that have
option 82 information and a null IP
address (0.0.0.0) in the giaddr fields.
“IP DHCP-RELAY INFORMATION
POLICY” on page 476 Global
Configuration Sets the response of the DHCP relay
agent to client packets containing
option-82 information.
“IP DHCP-RELAY MAX-MESSAGE-
LENGTH” on page 478 Global
Configuration Sets the maximum permitted length in
bytes of DHCP client requests.
“IP DHCP-RELAY MAXHOPS” on
page 479 Global
Configuration Sets the hop count for DHCP
requests.
“IP DHCP-RELAY SERVER-
ADDRESS” on page 480 Global
Configuration Adds IP addresses of DHCP servers
to the relay agent.
“NO IP DHCP-RELAY” on page 481 VLAN
Configuration Removes the DHCP relay agent from
VLANs to stop them from forwarding
any further DHCP requests.
“NO IP DHCP-RELAY AGENT-
OPTION” on page 482 Global
Configuration Stops the DHCP relay agent from
inserting its option 82 information in
the DHCP request packets from
clients.