beautypg.com

Show ipv6 route, Figure 75. show ipv6 route command – Allied Telesis AT-FS970M Series User Manual

Page 330

background image

Chapter 14: IPv4 and IPv6 Management Address Commands

330

SHOW IPV6 ROUTE

Syntax

show ipv6 route

Parameters

None

Mode

Privileged Exec mode

Description

Use this command to display the IPv6 management address and default
gateway on the switch. Figure 75 is an example of the information. The
default route is display first, followed by the management address.

Figure 75. SHOW IPV6 ROUTE Command

Example

The following example displays the IPv6 management address and
default gateway:

awplus# show ipv6 route

IPv6 Routing Table
Codes: C - connected, S - static

S 0:0:0:0:0:0:0:0/0 via 832a:5821:b34a:0:0:0:187:14, vlan4-0

C 832a:5821:b34a:0:0:0:187:95a/64 via ::, vlan4-0

See also other documents in the category Allied Telesis Computer hardware: