Allied Telesis AT-FS970M Series - Manual (Page 903)

903
Chapter 59
Port-based and Tagged VLAN
Commands
The VLAN commands are summarized in Table 97 and described in detail
within the chapter.
Table 97. Port-based and Tagged VLAN Commands
Command Mode Description
“NO SWITCHPORT ACCESS VLAN”
on page 904 Port Interface Removes untagged ports from
VLANs.
“NO SWITCHPORT TRUNK” on
page 905 Port Interface Removes the tagged designation from
ports.
“NO SWITCHPORT TRUNK NATIVE
VLAN” on page 906 Port Interface Reestablishes the Default_VLAN as
the native VLAN of tagged ports.
“NO VLAN” on page 907 VLAN
Configuration Deletes VLANs from the switch.
“SHOW VLAN” on page 908 User Exec and
Privileged Exec Displays all the VLANs on the switch.
“SWITCHPORT ACCESS VLAN” on
page 910 Port Interface Adds untagged ports to a VLAN.
“SWITCHPORT MODE ACCESS” on
page 912 Port Interface Designates ports as untagged ports.
“SWITCHPORT MODE TRUNK” on
page 913 Port Interface Designates ports as tagged ports.
“SWITCHPORT TRUNK ALLOWED
VLAN” on page 915 Port Interface Adds and removes tagged ports from
VLANs.
“SWITCHPORT TRUNK NATIVE
VLAN” on page 918 Port Interface Designates native VLANs for tagged
ports.
“VLAN” on page 920 VLAN
Configuration Creates VLANs.