Allied Telesis AT-FS970M Series - Manual (Page 1157)

1157
Chapter 73
SNMPv3 Commands
The SNMPv3 commands are summarized in Table 117 and described in
detail within the chapter.
Table 117. SNMPv3 Commands
Command Mode Description
“NO SNMP-SERVER” on page 1159 Global
Configuration Disables SNMPv1, v2c and v3 on the
switch.
“NO SNMP-SERVER ENGINEID
LOCAL” on page 1160 Global
Configuration Returns the SNMP engine ID value to
the default value:
“NO SNMP-SERVER GROUP” on
page 1161 Global
Configuration Deletes SNMPv3 groups from the
switch.
“NO SNMP-SERVER HOST” on
page 1162 Global
Configuration Deletes SNMPv3 host entries.
“NO SNMP-SERVER USER” on
page 1164 Global
Configuration Deletes SNMPv3 users from the
switch.
“NO SNMP-SERVER VIEW” on
page 1165 Global
Configuration Deletes SNMPv3 views from the
switch.
“SHOW SNMP-SERVER” on
page 1166 Privileged Exec Displays the current status of SNMP
on the switch.
“SHOW SNMP-SERVER GROUP” on
page 1167 Privileged Exec Displays the SNMPv3 groups.
“SHOW SNMP-SERVER HOST” on
page 1168 Privileged Exec Displays SNMPv3 host entries.
“SHOW SNMP-SERVER USER” on
page 1169 Privileged Exec Displays SNMPv3 users.
“SHOW SNMP-SERVER VIEW” on
page 1170 Privileged Exec Displays SNMPv3 views.
“SNMP-SERVER” on page 1171 Global
Configuration Activates SNMPv1, v2c and v3 on the
switch.
“SNMP-SERVER ENGINEID LOCAL”
on page 1172 Global
Configuration Configures the SNMPv3 engine ID.