beautypg.com

Show static-channel-group, Figure 136. show static-channel-group command – Allied Telesis AT-FS970M Series User Manual

Page 721

background image

AT-FS970M Switch Command Line User’s Guide

721

SHOW STATIC-CHANNEL-GROUP

Syntax

show static-channel-group

Parameters

None

Modes

User Exec mode and Privileged Exec mode

Description

Use this command to display the member ports of static port trunks on the
switch. An example of the command is shown in Figure 136.

Figure 136. SHOW STATIC-CHANNEL-GROUP Command

To view the load distribution methods of static port trunks, display the
running configuration with “SHOW RUNNING-CONFIG” on page 166.

Example

This example displays the member ports of a static port trunk:

awplus# show static-channel-group

% Static Aggregator: sa1
% Member:

port1.0.5
port1.0.6
port1.0.7

% Static Aggregator: sa2
% Member:

port1.0.19
port1.0.20
port1.0.21
port1.0.22