beautypg.com

No ip rip receive-packet 3, No ip rip receive-packet – Allied Telesis AT-FS970M Series User Manual

Page 1863

background image

AT-FS970M Switch Command Line User’s Guide

1863

NO IP RIP RECEIVE-PACKET

Syntax

no ip rip receive-packet

Parameters

None

Mode

VLAN Interface mode

Description

Use this command to stop routing interfaces from accepting routing
updates. By default, a routing interface is enabled to receive routing
updates.

Confirmation Command

“SHOW RUNNING-CONFIG” on page 166

Example

The following example stops the routing interface in VLAN 3 from
accepting routing updates:

awplus> enable
awplus# configure terminal
awplus(config)# interface vlan3
awplus(config-if)# no ip rip receive-packet