Allied Telesis AT-FS970M Series - Manual (Page 1473)

1473
Chapter 95
RADIUS and TACACS+ Client
Commands
The commands for the RADIUS and TACACS+ clients are summarized in
Table 153 and described in detail within the chapter.
Table 153. RADIUS and TACACS+ Client Commands
Command Mode Description
“AAA ACCOUNTING LOGIN” on
page 1475 Global
Configuration Configures RADIUS or TACACS+
accounting for login shell session.
“AAA AUTHENTICATION ENABLE
(TACACS+)” on page 1477 Global
Configuration Enables the TACACS+ password on
the switch.
“AAA AUTHENTICATION LOGIN” on
page 1479 Global
Configuration Enables RADIUS or TACACS+ on the
switch globally.
“IP RADIUS SOURCE-INTERFACE”
on page 1481 Global
Configuration Configures the RADIUS source IP
address interface.
“LOGIN AUTHENTICATION” on
page 1483 Console Line
and Virtual
Terminal Line Activates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO LOGIN AUTHENTICATION” on
page 1485 Console Line
and Virtual
Terminal Line Deactivates remote authentication for
local management sessions and
remote Telnet and SSH sessions.
“NO RADIUS-SERVER HOST” on
page 1486 Global
Configuration Deletes IP addresses of RADIUS
servers from the list of authentication
servers in the RADIUS client.
“NO TACACS-SERVER HOST” on
page 1487 Global
Configuration Deletes IP addresses of TACACS+
servers from the list of authentication
servers in the TACACS+ client.
“RADIUS-SERVER HOST” on
page 1488 Global
Configuration Adds IP addresses of RADIUS
servers to the RADIUS client for
remote authentication and accounting.
“RADIUS-SERVER KEY” on
page 1490 Global
Configuration Specifies the global encryption key of
the RADIUS servers.