Show dot1x 3, Figure 194. show dot1x command 3, Show dot1x – Allied Telesis AT-FS970M Series User Manual

Page 1113

Text mode
Original mode

AT-FS970M Switch Command Line User’s Guide

1113

SHOW DOT1X

Syntax

show dot1x

Parameters

None

Mode

Privileged Exec mode

Description

Use this command to display whether 802.1x port-based network access
control is enabled or disabled on the switch and the IP addresses of the
RADIUS servers. An example is shown in Figure 194.

Figure 194. SHOW DOT1X Command

Example

This example displays the status of the 802.1x port-based network access
control feature and the IP addresses of the RADIUS servers:

awplus# show dot1x

802.1 Port-Based Authentication: Enabled

RADIUS server address (auth): 149.32.146.78